Magnetic Separators

• Compact design
• Electric motor with chain drive transmission
• Departure of the belt can be recrified automatically
• Low noise
• Low maintenance

• The drum magnet is capable of performing continuous separation without demanding down time or time slots for cleaning.
• Self-cleaning with low maintenance
• The RPM of drum magnetic such that even heavily contaminated ferrous substances are totally removed.
• Size range of medium and small are effectively handled.
• Huge volumes are effortlessly handled.

Materials that can be fed on to the drum magnet for separation includes all kinds of dry powders, granules, grains, spices, tea, coffee etc. By putting the drum magnet into use one can be sure of thorough ferrous separation which will help in successful completion.

Drum magnets are robust in construction and are capable of working flawlessly under tough conditions. Send in your requirements for the drum magnet and our technical team will assist you in choosing the one that suits your requirement best.

• Seamless performance
• Application specific design
• Highly effective separation

• Permanent magnetic overband Separators are made with powerful Strontium Ferrite magnets and supplied for deep depth up to 300 mm.
• Manufactured to suit conveyor width.

• Rugged design remarkable performance reliable and safe

• Sintered neodymium-iron-boron

• Strip casting and HDDR

• High coercive force, the
• Max operation temp is up to 240 degree centigrade or 380 curie temperature.

• Rod neodymium magnet

• Ni, Zn, gold, copper, epoxy, passivation, phosphorization, parylene or custom

• AC, DC, servo motors (with segment magnets).
• Speaker parts (with ring magnet).
• Sensors part
• Magnetic coupling(with segment magnets)
• Magnetic chuck (with big blocks magnet)
• Security systems
• Magnetic separators
• Filters
• Brush-less motor.

As Magnetic Separator manufacturer and supplier our range includes Magnetic Roll Separators, Magnetic Drum Separators, Over-band Magnetic Separator, Liquid Line Magnets, Magnetic Head Pulley, Eddy Current Separator, Wet High Intensity Magnetic Separator, Low Intensity Magnetic Separator, Electrostatic Drum Separators, Wet Drum Separators, Magnetic Scrap Drum Separators, Magnetic Grill.

Magnetic Roll Separators:

STAR TRACE Magnetic Roll Separator is a roll type dry magnetic separator with fixed magnet having high field intense and gradient. The magnets used in the Roll Magnetic Separators are made of alloys of rare earth elements are more powerful as compared to other magnets.

Magnetic Drum Separators:

STAR TRACE Magnetic Drum Separators are primarily designed and manufactured as low field intensity separators. They have an open magnetic system with the magnetic poles located in one plain. Low field intensity separators are employed for separating iron particles from bulk material whenever foreign iron disturbs the subsequent process sequences

Overband Magnetic Separators:

STAR TRACE’s Overband Magnetic Separators have been developed to handle high volume product stream flows that exceed the limitations of standard permanent suspended magnets. These models are available in both, manual on/off or automatic, self cleaning system designs.

Liquid Line Magnets:

STAR TRACE's Liquid Line Magnets are designed to extract the ferrous materials from the slurry or liquid raw materials in order to purify the material in the production process. Strong magnetic tubes filter the flow and extract the unwanted ferrous metal.

Eddy Current Separator:

STAR TRACE Eddy Current Separator provides an effective way of removing non-ferrous metals from other products. Application such as aluminium cans from municipal waste, aluminium flakes from shredded PET, brass and aluminium from foundry sands, and metals from shredded auto-mobile scrap, other metals such as lead can also be removed.

Electrostatic Drum Separators:

The Electrostatic Drum Separators designed, developed and supplied by us have excellent quality and is offered at market leading prices. Electrostatic drum separators are designed for separating mixtures of bulk materials, which are differing by their electrical properties. These superior quality high tension electrostatic drum separator are manufactured following international norms and standards to satisfy the customers and maintaining products quality.

Wet Drum Magnetic Separator:

Star Trace the Wet Drum Magnetic Separator manufacturer is one of the leading manufacturers of ore dressing equipment. The present range of Star Trace process equipment enables us to provide complete packages. Magnetic wet separators constitute an important part of the product range and are known for advanced engineering design and excellent performance.

As a result of continuous development in separator technology Star Trace can offer a complete line of magnetic wet separators to the mining and mineral industries.

• Brand Star Trace
• Magnet Grade N35,N42,N52
• Size 3MM-50MM

• Outstanding magnetic power
• Compact design
• Optimum performance

• Outstanding magnetic power
• Compact design
• Optimum performance

• Magnetic filters are engineered to remove ferrous contaminants from liquid and slurry lines
• Efficiently remove tramp iron before maintenance and product contamination problems occur
• The benefits of this magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates
• All units incorporate a sump type housing to trap non-ferrous particles
• Liquid traps may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency

• Outstanding magnetic power
• Compact design
• Optimum performance

• Outstanding magnetic power
• Compact design
• Optimum performance

• Liquid Line Magnetic Separator are engineered to remove ferrous contaminants from liquid and slurry lines
• Efficiently remove tramp iron before maintenance and product contamination problems occur
• The benefits of this magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates
• All units incorporate a sump type housing to trap non-ferrous particles. Liquid Traps may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency

• 100% Stainless Steel construction
• Liquid tight with food grade O-rings
• Easy access for inspection and maintenance
• Tri-clamp, Bevel-seat (Acme thread), or weld end inlet and outlets
• It is equipped with high-energy Rare-earth Magnets. Diameter of magnetic bar is 1"
• Construction uses Type 304 stainless steel. Type 316 stainless steel available on request
• It can be fastened by screw nuts; it also can be fastened by band clamp
• Easy-clean type can be provided on request

• Half magnet
• Continuous working
• Ferrite and rare earth system available
• Ferrous materials recovering or removing

• Support the separation sort-out for the products with the requirement of the high purification.
• Auto-separation available between the magnetic substance and non-magnetic substance and with capability of continuous working.
• Could be designed with multiple-layers magnetic rollers or single-layer roller, depending on customer requirement.
• The diameter for standard product: 100, 500, 180 mm. The max width of magnetic roller up to 1500 mm.

• Industry mineral/ore: silicon, sand, quartz(silicon rock), feldspar and black granitic nepheline.
• Grinding compound and fire-proof material: Aluminium oxide, chromite, emery
• Heavy ore sand: ilmenite, leucoxene
• Food, medicine and chemical product.
• Precision plastics
• Ceramics and glass raw materials
• Recycled material
• Special material and metal, electronic waste etc.

Magnetic Filter  is widely used on various projects which need solid-liquid separation

• According to cake discharging type: automatic and manual.
• According to pressing type: automatic and manual.
• According to the material of plate: polypropylene, membrane, and stainless steel.
• Municipal waste water treatment
• Ore pulp de-watering
• Food industry
• Pharmaceutical
• Pulp and paper mill sludge
• Livestock manure
• Beverage
• Metallurgy
• Leather sludge
• Aquatic product sludge

Frame filter plate filter cloth control cabinet hydraulic station, etc.

Our magnetic sweepers clear important traffic areas of dangerous scrap iron and reduce the possibility of costly flat tires or personal injury. We manufacture and distribute magnetic sweepers for any size job. Push type models clear airless and walkways with 12" - 36" sweeping widths, available with or without easy load release. Hang type sweepers (18" to 96" models) attach to trucks of fork lifts and will lift a 3 ½”.

Long 16 penny nail from 5" off the ground! Our 72" and 96" trailer type sweepers tackle the really big jobs-roads, parking lots, runways and more. All models feature strong, permanent magnetism, quality construction and operate on paved or unpaved surfaces. We're your best source for magnetic sweepers.

Widely used in the workshop, parking lot, lawn, warehouse even air port.

• The concentrator separator is available in a wide range of sizes and capacities up to approx. 100 tph and 650 mm belt width up to 2000 mm belt width.

• A variable speed drive motor can be furnished in place of the slandered constant motor if varied products are to be handled. the built-in feeder and motor starter can be furnished separately for remote mounting where remote control is desired. multiple-stage units can be supplied for unusually difficult materials. other sizes on request.

• Wide range of applications
• Flawless finish
• Impeccable performance

Specialized in Magnetic Coolant Separator manufacturing, Star trace provides a wide range of Coolant filtration systems. A team of committed professionals with more than one decade of experience are available, who have designed, developed and supplied filters to various industries. Star trace filters are working in different industries like engineering, auto-mobile, bearings, spindles, textile machinery rolling mills, wire drawing etc. , the filters have been supplied to both indigenous and imported machines and also used as original fitments by many machine tool builders. The company has wide range of standard models to choose from and special / larger system can be designed and supplied as per requirement and application.

• Magnetic filter are suitable for cylindrical, centre-less, surface & internal grinding machines, thread grinders, honing machines, rolling mills etc.,
• It is also used as a pre-filter along with other types of coolant filters like paper band or hydro cyclone filters. The unit can be fitted on existing.

• Magnetic filter consists of powerful magnetic drum driven by double reduction worm geared motor. The contaminated coolant from the machine is passed is through the gap between the drum and the body. The dust particles are attracted by the drum and a rubber roller squeezes the swart which is scrapped off by a scrapper plate. The clean coolant is collected is the coolant tank for recirculation to the machine.

• Removes ferrous particles from coolants
• Improves surface finish on components
• Increases coolant life & wheel life
• Frequent cleaning of coolant tank is avoided
• Can be used as a pre-filter for other filtration systems