EXPLORE MORE CATEGORIES
- Home
- »
- Products We Offer
- »
- Vibratory Feeders
Vibratory Feeders
Vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. In sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at
receiving hopper. With easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries.
This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged.
receiving hopper. With easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries.
This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged.
Feeder Vibrating Furnace Charger
Get Latest Price
Product Details:
| Material Property | Galvanised |
| Frequency | 50 Hz |
| Weight (kilogram) | 4300 Kgs |
| Material | Mild Steel |
| Power Supply(volt) | 415 volts, 3 phase |
| Length of travel | 18000 mm |
| Capacity | 2 Ton/hrs |
Feeder Vibrating Furnace Charger consists of a vibrating feeder mounted on a moving trolley with a storage hopper mounted above the feeder. Our company make vibratory furnace chargers basically comprise of the following parts. Vibrating Feeder suitable for delivering required capacity. Storage hopper of required capacity. Moving carriage with the driving arrangement. Control panel for operating the system. Cable reeling Drum / Cable Drag Chain.
Get Best QuoteRequest A Callback
Vibrating Feed Furnace Charger
Get Latest Price
Product Details:
| Material | Mild Steel |
| Tray Length | 2500 mm |
| Capacity | 2 ton/hrs |
| Power Supply | 415 volts, 3 phase |
| Length of Chain | 17500 mm |
| Link height | 92 mm |
We are presenting Vibrating Feed Furnace Charger from our large assortment of vibratory feeders that is exclusively designed for feeding large and irregular sized materials such as scrap, pig iron, bales and foundry retains.
Get Best QuoteRequest A Callback
Tubular Vibratory Feeder
Product Price: Rs 1.2 Lakh / UnitGet Best Price
Tubular Vibratory feeder ensures that all the material safely transferred from the feed hopper to the required destination. Available in round or square sections, tubular feeder is manufacturers in a range of sections from 100 mm to 500 mm and in lengths of up to 6. 5 meters.
Powered either by vibratory motors or electromagnetic drive units tubular feeder can be operated at tube angles from 14 uphill to 15 declinations. Star trace tubular feeders ensure that all the material safely transferred from the feed hopper to the required destination.
Specifications:
Powered either by vibratory motors or electromagnetic drive units tubular feeder can be operated at tube angles from 14 uphill to 15 declinations. Star trace tubular feeders ensure that all the material safely transferred from the feed hopper to the required destination.
Specifications:
- Section Type: Round, Square
- Section sizE: 100 mm to 500 mm
- Length: up to 6.50 meters
Get Best QuoteRequest A Callback
Flip Flop Vibratory Screen
Product Price: Rs 1.9 Lakh / UnitGet Best Price
Flip Flop Vibratory Screen
The Flip flop vibratory screen is designed to perfection by the leading manufacturer Star Trace. Screening the bulk material is an important process. In order to screen the bulk material in difficult products like damp, stalk and leaf materials or matted substance Flip Flip screen is being used.
Working Principle:
Star Trace Flip-flop vibratory screens expand upon the traditional linear vibratory screening method and the conventional circular vibration screens by combining the two motions in order to create dual vibration movement. These flip-flop screens are highly effective because with the aid of resonance they use only one drive to power the dual vibration, and because they come fitted with the latest screens, which are proven to be extremely effective in screening all manner of waste material.
Features & Benefits:
The Flip flop vibratory screen is designed to perfection by the leading manufacturer Star Trace. Screening the bulk material is an important process. In order to screen the bulk material in difficult products like damp, stalk and leaf materials or matted substance Flip Flip screen is being used.
Working Principle:
Star Trace Flip-flop vibratory screens expand upon the traditional linear vibratory screening method and the conventional circular vibration screens by combining the two motions in order to create dual vibration movement. These flip-flop screens are highly effective because with the aid of resonance they use only one drive to power the dual vibration, and because they come fitted with the latest screens, which are proven to be extremely effective in screening all manner of waste material.
Features & Benefits:
- Low maintenance and operating cost.
- High availability of screening machinery.
- Compact and modular construction..
- Single or multi deck type
- Applications:
- Sand & Crushed Stone.
- Iron / Bauxite / Copper Ore.
- Coal, Coke & Iron Ore Fines.
- Limestone & Dolomite.
- Basalts & Gypsum.
- Municipal Solid Waste.
- Construction & Demolition.
- E-Waste recycling.
- Wood Chips, Sawdust, & Wood Flour.
- Bio-Solids.
- Shredded Materials.
- Chemicals.
Get Best QuoteRequest A Callback
Vibratory Feeders
Product Price: Rs 65,000 / UnitGet Best Price
Vibratory Feeders, electromechanical feeder, electromagnetic feeder & grizzly feeder are the wide range of equipment manufactured and supplied by Star Trace.
Vibratory Feeder vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper, with easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries. This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged.
Electromechanical Feeder electromechanical feeder is used to transfer the large size materials and granular materials from silo to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line. There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the feeder.
Electromagnetic Feeder electromagnetic vibrating automatic feeder can feed lump or granulated materials to the other devices evenly and continuously in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper. There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed.the component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the automatic feeder vibrate along straight line. When materials are fed into the automatic feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the automatic feeder.
Grizzly Feeder our grizzly feeder adopts linear vibrating feeding and the whole-base structure. though the step less adjustment the angle of eccentric block, you can control the vibrating strength conveniently and the amounts of feeding.
Advantages: it is steady vibrating, reliable working, flexible adjustment, easy instalment and so on. It is efficient to reduce the working cost and the pressure of workers, so it is the perfect machine as the continual and uniform feeder for stone crusher.
Vibratory Feeder vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper, with easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries. This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged.
Electromechanical Feeder electromechanical feeder is used to transfer the large size materials and granular materials from silo to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line. There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the feeder.
Electromagnetic Feeder electromagnetic vibrating automatic feeder can feed lump or granulated materials to the other devices evenly and continuously in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper. There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed.the component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the automatic feeder vibrate along straight line. When materials are fed into the automatic feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the automatic feeder.
Grizzly Feeder our grizzly feeder adopts linear vibrating feeding and the whole-base structure. though the step less adjustment the angle of eccentric block, you can control the vibrating strength conveniently and the amounts of feeding.
Advantages: it is steady vibrating, reliable working, flexible adjustment, easy instalment and so on. It is efficient to reduce the working cost and the pressure of workers, so it is the perfect machine as the continual and uniform feeder for stone crusher.
Get Best QuoteRequest A Callback
Vibrating Feeders
Product Price: Rs 95,000 / UnitGet Best Price
As a leading manufacturer of Vibrating Feeders our range includes vibratory feeder, electromechanical feeder, electromagnetic feeder & grizzly feeder.
Vibratory Feeder
Vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper. With easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries.
This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged.
Electromechanical Feeder
Electromechanical feeder is used to transfer the large size materials and granular materials from silo to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line.
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. the component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. when materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. the materials will move forward on the slope surface of the feeder.
Electromagnetic Feeder
Electromagnetic vibrating automatic feeder can feed lump or granulated materials to the other devices evenly and continuously. in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper.
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the automatic feeder vibrate along straight line. When materials are fed into the automatic feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the automatic feeder.
Grizzly Feeder
Our grizzly feeder adopts linear vibrating feeding and the whole-base structure. Though the step less adjustment the angle of eccentric block, you can control the vibrating strength conveniently and the amounts of feeding.
Advantages: it is steady vibrating, reliable working, flexible adjustment, easy instalment and so on. It is efficient to reduce the working cost and the pressure of workers, so it is the perfect machine as the continual and uniform feeder for stone crusher.
Vibratory Feeder
Vibrating feeder can feed lump or granulated materials to the other devices evenly and continuously. in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper. With easy flow adjustment, low noise and energy consumption, vibrating feeder is applied to crushing and screening production lines on crushing site, in mining, metallurgy, building material, chemistry, mineral processing, and coal industries.
This vibrating feeder adopts an eccentric block to produce centrifugal force which makes the movable parts like screen box and vibrator move continuously in a circle or an approximate circle. The material then vibrates and jumps with the screen box on the tilted screen and is then continuously and equably discharged.
Electromechanical Feeder
Electromechanical feeder is used to transfer the large size materials and granular materials from silo to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line.
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. the component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. when materials are fed into the feeder, they may be thrown up and move like para curve, then fall down. the materials will move forward on the slope surface of the feeder.
Electromagnetic Feeder
Electromagnetic vibrating automatic feeder can feed lump or granulated materials to the other devices evenly and continuously. in sand and gravel production line, the continuous feeding of the vibrating feeding machine helps avoid the blockage at receiving hopper.
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the automatic feeder vibrate along straight line. When materials are fed into the automatic feeder, they may be thrown up and move like para curve, then fall down. The materials will move forward on the slope surface of the automatic feeder.
Grizzly Feeder
Our grizzly feeder adopts linear vibrating feeding and the whole-base structure. Though the step less adjustment the angle of eccentric block, you can control the vibrating strength conveniently and the amounts of feeding.
Advantages: it is steady vibrating, reliable working, flexible adjustment, easy instalment and so on. It is efficient to reduce the working cost and the pressure of workers, so it is the perfect machine as the continual and uniform feeder for stone crusher.
Get Best QuoteRequest A Callback
Vibrating Feeder Furnace Charger
Get Latest Price
Product Details:
| Material | Mild Steel |
| Tray length | 2500 mm |
| Material of Liner | 6 mm Thk. sail ma |
| Power Supply | 415 V |
| Bending radius | 250 mm |
| Type of stay | Split Type |
| Total Weight | 4300 Kg |
Vibrating Feeder Furnace Charger is effective solutions to problems such as high labour cost, hazards operators faced in foundries, melting shops etc.
Get Best QuoteRequest A Callback
Electromagnetic Vibrating Feeder
Product Price: Rs 94,000 / UnitGet Best Price
Electromagnetic Vibrating Feeder is a superior product of Star Trace who are engaged in manufacturing, supplying, and exporting a wide array of vibratory feeders that are designed for feeding lump or granulated materials. In sand or gravel production line its seamless feeding prevents blockages at receiving hopper. It achieves remarkable performance with help of two eccentric shafts rotating at high speeds in opposite directions. We use the best grades of metal alloys and other components to manufacture these and offer them at reasonable prices.
Features:
Specifications
Features:
- Long service life
- Flawless performance
- Optimal design
Specifications
| Model | Size of hopper (mm) | Max. feeding granularity (mm) | Productivity (t/h) | Power (kw) | Weight (kg) | Dimension (L x W x H) (mm) |
| STVF-800 x 3000 | 850 x 3000 | 400 | 80-120 | 1.5 x 2 | 3895 | 3100x1800x1600 |
| STVF-960 x 3800 | 960 x 3800 | 500 | 120-210 | 2.2 x 2 | 3980 | 3850x1950x1630 |
| STVF-1100 x 4200 | 1100 x 4200 | 580 | 200-430 | 3.7 x 2 | 5570 | 4400x2050x1660 |
| STVF-1100 x 4900 | 1100 x 4900 | 580 | 280-500 | 5.5 x 2 | 6520 | 5200x2050x1700 |
| STVF-1300 x 5200 | 1300 x 4900 | 650 | 450-600 | 7.5 x 2 | 8200 | 5200x2350x1750 |
Get Best QuoteRequest A Callback
Vibratory Furnace Charger
Product Price: Rs 1.5 Lakh / UnitGet Best Price
We are presenting Vibratory Furnace Charger from our large assortment of vibratory feeders that is exclusively designed for feeding large and irregular sized materials such as scrap, pig iron, bales and foundry retains and has a specially designed hopper for this purpose. It ensures safety as well as speed of charging by preventing damage to surface lining of the furnace. It allows adjustment in the speed of charge by changing amplitude of vibrations to match speed of the process and offers precise and automated batch control.
Features:
Specifications:
Features:
- Reduces labor costs
- Efficient performance
- Operator safety enhanced
Specifications:
- Tray length: 2500 mm
- Tray width: 700 mm
- Capacity: 2 Ton/hrs
- Moc of trough: 6 mm Thk. - Ms
- Material of liner: 6 mm Thk. sail ma
- Discharge portion of the feeder tray: Ss 304 with sail ma liner
- Drive K.W.: 2 X 1.5 Kw, 4 Pole, 1440 R.P.M, motors with ‘f’ class
- Power Supply: 415 volts, 3 phase, 50 hz, Ac Supply System
- Geared motor cable drag chain: 3 ph, Ac, 50 hz, 415 V, 1.5 Hp, 20 rpm
- Type of chain: 125
- Length of travel: 18000 mm
- Length of chain: 17500 mm
- Bending radius: 250 mm
- Width of the chain: 150 mm
- Link height: 92 Mm
- Size of holes: 1 X 50 mm X 100 mm (Oblong)
- Type of stay: Split hole type
- Moc: Mild steel galvanised
- Weight of the trolley: 1800 Kgs (Approx.)
- Weight of the bulk material: 2500 Kgs (Approx.)
- Total weight: 4300 Kgs (Approx.)
- Insulation with temperature: Rise limited to ‘f’ class
Get Best QuoteRequest A Callback
Industrial Vibrators
Product Price: Rs 22,000 / UnitGet Best Price
Product Details:
| Condition | New |
| Structure | Rustproof Extruded Aluminium Body Fitted With Hardened Steel Races On Which a Steel Ball Rotates. |
| Motor | 3 phase |
| Applications | Hoppers, Silos to Prevent Congestion of Material Flow |
Industrial Vibrators
Vibratory motors are robust, reliable, high loadable, quiet running and require no maintenance. Vibratory motors are totally enclosed 3phase, squirrel cage induction motors with adjustable, eccentric weights mounted at both ends of the shaft, to set up vibrations during rotation, these motors are used in various material handling equipment such as vibrating screens, conveyors and feeder. They are also used on hoppers, silos to prevent congestion of material flow.
Pneumatic Vibrators:
Star trace pvt ltd. is a reputed dealer in manufacturing and exporting of pneumatic ball vibrator in India. Star trace pneumatic ball vibrators are manufactured with a rustproof extruded aluminium body fitted with hardened steel races on which a steel ball rotates.
Electromagnetic Vibrator:
Star trace electromagnetic vibrators offer an economical means of maintaining the flow of bulk materials from bins, hoppers and chutes. They come with an easily adjustable control which provides flexibility and assures optimum flow for the type of material being handled. Furthermore, electromagnetic vibrators can be operated continuously or intermittently depending upon the specific requirements. to assure the highest standard of quality, electromagnetic vibrators are factory tested and adjusted for optimum performance. Most models come standard with totally enclosed, dust-tight and water-proof construction, since these vibrators have no rotating or sliding parts, they are virtually maintenance-free. Electromagnetic vibrators come with the technical expertise and his application staff, who have been providing productive solutions for a wide variety of material handling problems.
Get Best QuoteRequest A Callback
Electromechanical Vibratory Feeder
Product Price: Rs 97,000 / UnitGet Best Price
Electromechanical Vibrating Feeder is used to transfer the large size materials and granular materials from Silo to receiving device uniformly, periodically and continuously in the production flow and to feed materials into the crusher continuously and uniformly also to screen the materials in the sandstone production line.
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like Para curve, then fall down. The materials will move forward on the slope surface of the feeder.
Specifications
There are two eccentric shafts rotating at high speed at the same time from opposite directions, thus the strong centrifugal force is formed. The component forces of centrifugal force along the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like Para curve, then fall down. The materials will move forward on the slope surface of the feeder.
Specifications
| Model and specification | Size of hopper (mm) | Max. feeding granularity (mm) | Productivity (t/h) | Power (kw) | Weight (kg) | Dimension (LxWxH)(mm) |
| STVF-800x3000 | 850x3000 | 400 | 80-120 | 1.5x2 | 3895 | 3100x1800x1600 |
| STVF-960x3800 | 960x3800 | 500 | 120-210 | 2.2x2 | 3980 | 3850x1950x1630 |
| STVF-1100x4200 | 1100x4200 | 580 | 200-430 | 3.7x2 | 5570 | 4400x2050x1660 |
| STVF-1100x4900 | 1100x4900 | 580 | 280-500 | 5.5x2 | 6520 | 5200x2050x1700 |
| STVF-1300x5200 | 1300x4900 | 650 | 450-600 | 7.5x2 | 8200 | 5200x2350x1750 |
Get Best QuoteRequest A Callback
Geared Force Exciter
Product Price: Rs 99,000 / UnitGet Best Price
Geared Force Exciter
Geared Force Exciter is manufactured by one of the leading manufacturing company, Star Trace. Geared Force Exciter is used in the heavy-duty gearbox to create the linear vibrations for volumed material handling with maximum feed rates. Our Geared force exciter provides maximum opearational efficiency.
Working Principle
Star Trace gear box is having two types of counter rotating shafts. Each counter shafts having two counter weights to produce linear motion for vibrating feeders, screens and so on. The special care should be taken while manufacturing the counter weights so that the static moment is delivered as we required.The special care should be taken while manufacturing the counter weights so that the static moment is delivered as we required. The gearbox contains hardened and ground gears in a cast housing. The additional holeas are provided in the counter weights is used for adjust the mass according to the required static moment. Our geared force exciter is customized products and depends upon the need with input speed ranging from 750-1500rpm and dynamic moments from 500kgcm-170,000kgcm. The bearings are accommodated in oil-lubricated due to high-speed operation of the gears.
Applications :
Geared Exciters used in Sizing, feeding, conveying, Desliming, Dewatering, extraction, purification, segregation of bulk material in the mining, iron, steel, cement, fertilizer, chemical and ceramics industries.
Geared Force Exciter is manufactured by one of the leading manufacturing company, Star Trace. Geared Force Exciter is used in the heavy-duty gearbox to create the linear vibrations for volumed material handling with maximum feed rates. Our Geared force exciter provides maximum opearational efficiency.
Working Principle
Star Trace gear box is having two types of counter rotating shafts. Each counter shafts having two counter weights to produce linear motion for vibrating feeders, screens and so on. The special care should be taken while manufacturing the counter weights so that the static moment is delivered as we required.The special care should be taken while manufacturing the counter weights so that the static moment is delivered as we required. The gearbox contains hardened and ground gears in a cast housing. The additional holeas are provided in the counter weights is used for adjust the mass according to the required static moment. Our geared force exciter is customized products and depends upon the need with input speed ranging from 750-1500rpm and dynamic moments from 500kgcm-170,000kgcm. The bearings are accommodated in oil-lubricated due to high-speed operation of the gears.
Applications :
Geared Exciters used in Sizing, feeding, conveying, Desliming, Dewatering, extraction, purification, segregation of bulk material in the mining, iron, steel, cement, fertilizer, chemical and ceramics industries.
Get Best QuoteRequest A Callback
Reciprocating Feeder
Product Price: Rs 1.75 Lakh / UnitGet Best Price
Introduction :
Star Trace Reciprocating feeder is a kind of machine that makes use of the linkage drag down dip 5 ° floor do straight reciprocating motion in a roll. It leads to the material ,such as coal or other abrasive small, loose granular with little sticky, powdery materials ,move from the feeding equipment into another feeding equipment evenly. The position of the crank can be regulated so as to achieve adjustment of feeding capacity.
Working Principle
Star Trace Reciprocating Feeder started automatically dragging the bottom whose inclined angle is 5 degree to make a linear and reciprocal movement on the idlers through flexible coupling, reducer, crank connecting rod, then coal drop continously uniform on the conveying equipment or in other screening equipment.This machine can be designed as reciprocal feeder with hopper and without hopper according to request depending on order. Besides it is used for coal feeding, also used for other small polishing and viscosity scattered materials.
Structure features
It is composed of the main frame, soleplate (coal feeding trough), transmission platform, funnel, paddle door and idlers. After the motor starting work, the soleplate with a tilt angle of 5 is dragged to reciprocate in a linear motion path on the idlers via flexible coupling and reducer,and discharging coal to other equipments.
Features :
Star Trace Reciprocating feeder is a kind of machine that makes use of the linkage drag down dip 5 ° floor do straight reciprocating motion in a roll. It leads to the material ,such as coal or other abrasive small, loose granular with little sticky, powdery materials ,move from the feeding equipment into another feeding equipment evenly. The position of the crank can be regulated so as to achieve adjustment of feeding capacity.
Working Principle
Star Trace Reciprocating Feeder started automatically dragging the bottom whose inclined angle is 5 degree to make a linear and reciprocal movement on the idlers through flexible coupling, reducer, crank connecting rod, then coal drop continously uniform on the conveying equipment or in other screening equipment.This machine can be designed as reciprocal feeder with hopper and without hopper according to request depending on order. Besides it is used for coal feeding, also used for other small polishing and viscosity scattered materials.
Structure features
It is composed of the main frame, soleplate (coal feeding trough), transmission platform, funnel, paddle door and idlers. After the motor starting work, the soleplate with a tilt angle of 5 is dragged to reciprocate in a linear motion path on the idlers via flexible coupling and reducer,and discharging coal to other equipments.
Features :
- Feeding amount can be conveniently adjusted at any time.
- Simple structure and reliable performance.
- Matching power and operating cost are both low.
- Designed with no quick-wearing parts makes equipment maintenance quite convenient.
- Occupies little space and requires just 1/5 the investment of medium plate mill.
- Application:
- It is mainly used for feeding various non-sticky materials.
- Mining.
- Construction.
- Quarry.
- Abrasive materials.
Get Best QuoteRequest A Callback